What Is Ghost Immobiliser Install? History Of Ghost Immobiliser Install
Why Should You Have a Ghost Immobiliser Installed?
Autowatch Ghost is an innovative car immobiliser of the future that safeguards your vehicle from theft. It operates in a discrete manner by connecting to a vehicle's CAN network and demanding that a unique, reversible PIN sequence is entered to start the vehicle.
The system is silent It does not have LED indicators, and is inaccessible with diagnostic tools. autowatch ghost 2 installers near me is TASSA approved and recognised by some insurance companies.
No key fobs or LED indicators.
Ghost immobilisers are a revolutionary development in car security that will keep thieves from operating your vehicle, even if they do manage to get inside. It connects silently to the CAN data circuit inside your vehicle, so there are no radio signals. This makes it impossible for a thief bypass it. It is also inaccessible by diagnostics and does not have an LED indicator to indicate its position. This makes it a good choice for vehicles that are expensive or rare, such as vintage cars.
Autowatch Ghost is an extremely small device that is able to be concealed within the vehicle's loom. This makes it virtually impossible for thieves and intruders to detect it. The device communicates with the ECU to prevent theft. It taps into the CAN (Controller Area Network) system. It is incredibly easy to install and can be put in place in just a few minutes. It is also a lot less intrusive than some other physical anti-theft devices, such as steering wheel locks.
The device is based on the same technology as GPS trackers, but it stops theft by preventing the vehicle from starting. It makes use of buttons on your car to create an individual, unique, and changeable PIN code that must be entered in order to drive your vehicle. The device can be programmed to utilize obscure buttons like those on the rear defroster to make it more difficult for thieves to figure out the PIN. This type of technology is becoming increasingly popular, and numerous insurance companies are now requiring it on vehicles with keys-less entry systems.
Another advantage of the Ghost is that it impedes key-cloning and hacking. The device is connected to the vehicle's CAN bus and uses the buttons to generate an individual code that can be altered. The code has to be entered to begin the vehicle. It is not defeated by adding new keys or altering the ECU. Instead, the criminal must employ a specific device to disable the immobiliser.
The ghost immobiliser can be purchased at a very low cost, and it can be paired with GPS tracking to ensure the safety of your vehicle. It's a great option for older vehicles and could save you money on insurance premiums. Contact Trackershop to request a quote on a ghost immobiliser. We'll add the installation into the cost, so you will be able to rest assured about the security of your vehicle.
It is TASSA approved
If you're trying to secure your vehicle by immobilizing it, an immobiliser is the best way to do it. It can shut down features such as the starter motor or the fuel pump in the event that the PIN code was not entered correctly. It is crucial to install an immobiliser by an expert. The installer must be TASSA approved, which ensures that the product is safe and works correctly. The process involves confirming the credentials of the installer. This includes a criminal background check and an identification check.
The Ghost immobiliser is the most recent solution to stop thieves from taking your car. It connects to the CAN data network in your vehicle and does not require for additional fobs or alarm systems. The system operates silently and is not able to be detected by thieves or car trackers. It uses the existing buttons on your steering wheel, door panels and the centre console to generate a unique PIN sequence. It is important to enter the correct sequence in order to start your vehicle. This makes it difficult for thieves to steal your car.
This revolutionary immobiliser is TASSA-approved and can be installed by Trackershop which is a company that specializes in the installation of this device. It also offers additional security products, such as a remote starter and a device to track theft. The team of technicians can install the device at your office or at home.
It is essential to secure your vehicle as increasing numbers of vehicles are being stolen with the owners' keys. Keyless vehicles of today are particularly vulnerable because it is simple to purchase cloning tools and door lock pick sets on the internet. Autowatch Ghost is a great method to protect yourself from this since it is not able to be identified by thieves and cannot even be detected by vehicle trackers.
The Ghost II CAN is completely concealed and is not able to be altered by thieves. It can detect attempts to alter the ECU and stop the components of the engine in an attempt to deactivate the immobiliser. It can also deactivate the alarm system to prevent getting attention from the wrong people and allow thieves to get away.
Reversible
The Ghost immobiliser can be installed or removed at anytime. It is directly connected to your vehicle's CAN (Controller Area Network) and protects you with a personalized PIN code with a private sequence that only you will be able to identify. Once the PIN is entered correctly, it will stop the vehicle from starting and prevent thieves from trying to steal your vehicle.
The installation of the Ghost is not invasive, and your vehicle's warranty will not be affected. The system is compatible with any aftermarket alarm or tracker that you may have installed. It will also not leave an imprint on your vehicle's interior or exterior. Contrary to other immobilisers does not utilize LED indicators or key fobs, making it impossible for thieves to find it.
Car thief gangs that are organized are currently using devices to read circuit wires in vehicles, however the Ghost Immobiliser does not use any of these methods. It makes use of buttons on the dashboard or the steering wheel to set up a unique PIN. This code is required to start the vehicle.
The Ghost Immobiliser can also safeguard your vehicle against OBD port hacking. This kind of theft is becoming more frequent and is also one of the most difficult ways to prevent. The Ghost Immobiliser helps prevent these thefts since it stops the burglar from connecting a laptop to your vehicle's port OBD and cloning keys.
The Ghost can be used in conjunction with a vehicle tracking device. This can be extremely useful in locating your vehicle after it's been stolen. However, it is not recommended that you utilize a tracker as the main anti-theft security measure since they don't stop theft in at all. They are also more easily to detect and remove than the Ghost immobiliser.
Easy to install
A Ghost immobiliser, a groundbreaking new technology, can help you safeguard your vehicle from theft. It works by connecting to your vehicle's CAN (Controller Area Network) system and generating a unique code sequence that is impossible for thieves to crack. It's an affordable and highly effective method of protecting your car from being stolen.
Ghost is designed to work with all vehicles which include aftermarket key fobs. It generates an individual PIN code by using the buttons on your dashboard, central console, and the steering wheel. This stops thieves from starting up your vehicle. It also has a variety of additional features, including a GPS tracker that can locate your vehicle.
This kind of device is a preferred choice among many drivers because it provides security against different kinds of vehicle theft. It is simple to install, silent, and does not use radio signals. It's also a good option for those who don't wish to purchase a full alarm system. However, it is important to employ a professional to install the alarm to ensure that it works effectively.
It is crucial that a professional install your ghost immobiliser in order to ensure it functions as it should. A professional will know the ideal location for it, and will make sure that the unit is properly bonded to your vehicle's electronic components. The installer will also make sure that the device is kept from view and cannot be seen by anyone without any reason to know about it.
The Autowatch Ghost II CAN Immobiliser can be set to Valet/Service mode, which allows your vehicle to be driven at 30mph without having to use the access key. This makes it perfect for valet parking and transporting your vehicle. It can also be used in this mode if your vehicle is being serviced by dealers. This mode is able to be disabled using the companion app, and reset after each use.
The Ghost is the only aftermarket CAN bus immobiliser that does not require wire cutting. It is directly connected to the CAN system that is onboard of your vehicle. It is not detectable with tools for diagnosis or cloning. It's safe from tampering, operates quietly and does not emit any radio signals. It is also reversible, allowing you to transfer it to another vehicle in the event of need.